How do I Winterize an Inboard Vs. Outboard Marine Engine?

Winterizing a marine engine requires different procedures depending on whether you have an inboard or outboard system. These differences are primarily based on how the cooling systems are designed and how the internal components are protected.

Inboard Engine Winterization

Inboard engines typically use a closed cooling system where raw water must be managed carefully. The process includes:

  1. Antifreeze Flush: The raw water side of the system must be completely drained and then flushed with a marine engine antifreeze flush solution to protect passages from freezing.
  2. Fogging the Engine: While the engine is idling, spray boat engine fogging oil directly into the carburetor or air intake. This continues until visible white smoke appears in the exhaust, indicating the cylinders and valves are coated.
  3. Oil Change: Change the engine oil and filter while the engine is still warm from the fogging process to remove acids and contaminants.

Outboard Engine Winterization

Outboard engines are open systems and are generally self-draining when positioned correctly. The steps include:

  1. Draining: Tilt the engine to a fully vertical (down) position to allow all water to exit the cooling passages via the lower unit.
  2. Antifreeze Flush: After draining, flush the system with marine antifreeze for added corrosion protection.
  3. Direct Fogging: Unlike inboards, you should remove the spark plugs and spray boat engine fogging oil directly into each cylinder. Crank the engine for a few seconds (without starting) to distribute the oil before reinstalling the plugs.
  4. Gear Oil Service: In addition to changing the engine oil (for four-stroke models), you must drain and replace the lower unit gear oil to ensure no trapped water freezes and cracks the housing.

Related FAQs