What are the Key Steps for an Outboard Motor in a Boat Winterization Checklist?

For an outboard motor, the winterization process focuses on flushing the system, protecting internal components from corrosion, and managing fluids for sub-zero temperatures.

The key steps are as follows:

  1. Flush the Engine: Connect garden hose muffs to the lower unit and run the engine with fresh water at idle for approximately 15 minutes. This removes salt and debris from the system.
  1. Fog the Engine: Add fogging oil through the spark plug holes to coat the cylinders and pistons. This prevents seized pistons and internal corrosion during the off-season.
  1. Apply Antifreeze: After draining the water, use a propylene glycol antifreeze to protect the lower unit. Fill the unit until the antifreeze exits the vent to ensure it can withstand freezing temperatures.
  1. Drain and Tilt: Ensure all remaining water is drained to prevent ice expansion damage. Reach hidden drain plugs if necessary and store the engine in a dry, elevated position.
  1. Battery and Propeller: Disconnect the battery, clean the terminals, and store it in a cool, dry place. Additionally, it is recommended to tilt the engine fully to access and verify all water has been evacuated.

Related FAQs